Product range
Steel lighting columns from footpath to freeway.
Every pole is made to order against your drawing, wind zone and luminaire. The specifications below are our standard ranges — tell us your project and we will quote the exact build.
01 — Urban roads & streets
Street lighting poles
Conical (spun) or octagonal (folded) shafts for residential streets, urban arterials, car parks and pedestrian areas. Slip-fit or side-entry bracket, single or double outreach, with a lockable inspection door and internal earthing stud.
| Mounting height | 3 – 12 m |
|---|---|
| Cross-section | Round-conical / octagonal / square |
| Material | S235JR / S355J2 steel to EN 10025 |
| Wall thickness | 3 – 4 mm |
| Bracket | Post-top, single or twin arm, 0.5 – 2.5 m outreach |
| Finish | Hot-dip galvanized ISO 1461; optional polyester powder top-coat (any RAL) |
| Mounting | Base-plate with anchor cage, or root-mounted (planted) |
02 — Motorways & national roads
Highway lighting columns
Taller columns for dual carriageways, interchanges, toll plazas and roundabouts. Available with a rigid flange base or a passively safe / breakaway base to EN 12767 where the road authority requires it.
| Mounting height | 10 – 16 m |
|---|---|
| Cross-section | Octagonal or round-conical, stepped or single-piece |
| Structural design | EN 40-3 / AASHTO |
| Wall thickness | 4 – 8 mm |
| Base | Flange plate + anchor bolts, or passively safe base (EN 12767) |
| Bracket | Single / double, up to 4 m outreach; raise-and-lower option |
| Finish | Hot-dip galvanized 70 – 85 µm; marine-grade coating option |
03 — Interchanges, ports & yards
High-mast poles
Polygonal masts that light large open areas — motorway interchanges, container terminals, rail yards, stadiums and border crossings — from a few tall points instead of many columns. Fixed head frame or a motor-driven lowering ring for ground-level maintenance.
| Height | 15 – 35 m |
|---|---|
| Cross-section | 18 / 20-sided polygonal, 2 – 4 slip-jointed sections |
| Head frame | Fixed, or raise-and-lower ring for 6 – 16 luminaires |
| Winch system | Double drum, stainless cables, portable power tool |
| Structural design | EN 40 / TIA-222 / AASHTO |
| Finish | Hot-dip galvanized inside and out; aircraft-warning paint option |
04 — City centres, parks & promenades
Decorative poles
Fluted, tapered and heritage-style columns with cast collars, ladder bars and banner arms for historic districts, boulevards, waterfronts and landscaped areas — where the daytime appearance matters as much as the light.
| Mounting height | 3 – 9 m |
|---|---|
| Style | Fluted, stepped, tapered; cast aluminium or steel base cover |
| Options | Banner arms, hanging-basket brackets, festoon points, GPS/CCTV mounts |
| Finish | Galvanized + architectural powder coat or micaceous iron oxide |
05 — Components
Brackets & accessories
Order these with a pole or on their own as spares and project extras.
Outreach arms
Single, double, 3- and 4-way; 0.5–4 m; post-top adaptors and spigots.
Base plates & flanges
Laser-cut and drilled to your bolt circle, gusseted where required.
Anchor bolt cages
Hot-dip galvanized J- or L-bolts, templates, nuts and washers pre-assembled.
Inspection doors
Flush, weathertight, triangular-key or padlock; with integral connection board.
Caps, collars & finials
Decorative and functional tops, transition collars and skirt covers.
Mounting hardware
Banner arms, camera brackets, junction boxes, fuse carriers and clamps.
Not sure which column your project needs?
Send the road type, wind zone and luminaire — our engineers will recommend a build.